Behringer EUROPOWER EP2000 Power Amplifier The rackmountable EP2000 EUROPOWER power amp from Behringer delivers up to 2 x 1,000 watts at 2 ohms, 2 x 750W at 4 ohms, and 2,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4\" TRS jacks allow for compatibility with any source. Selectable low-frequency filters let you remove distracting infra-sound frequencies, and its independent DC and thermal overload protection on each channel automatically protects your amp and speakers without stopping the show. The Behringer EUROPOWER's professional speaker connectors and \"touch-proof\" binding posts support most speaker wiring systems.

Output Power: 20Hz–20kHz @ 0.1% THD, both channels driven: 8 ohms per channel - 350W 4 ohms per channel - 500W 2 ohms per channel - 650WRMS @ 1% THD (sine wave), bridged mode: 8 ohms - 1000W 4 ohms - 1300WPeak power, both channels driven: 8 ohms per channel - 400W 4 ohms per channel - 750W 2 ohms per channel - 1000WPeak power, bridged mode: 8 ohms - 1500W 4 ohms - 2000WDistortion: 300 at 8 ohms Noise: -100 dB unweighted, 20Hz–20kHz Voltage Gain: 40X (32dB) Input sensitivity: 1.15V (+3.4 dBu) VRMS at 8 ohms Input impedance: 10kOhm unbalanced, 20kOhm balancedControls: Front: Power switch, gain control (channels 1 and 2) Rear: DIP switches (10x)Indicators: Power: Green LED Clip: Red LED, 1 per channel Signal: Yellow LED, 1 per channelInputs: Balanced XLR and 1/4\" TRS connectors Outputs: Touch-proof binding posts and professional speaker connectorsCooling: Continuously variable-speed fan, back-to-front airflow Amplifier Protection: Full short-circuit, open circuit, thermal, and HF protection Load Protection: Turn on/off muting, AC coupling Circuit Type: Class AB complementary linear outputPower Supply: Mains Voltage/Breaker: 100–120V~, 50/60Hz15A Power Consumption: 1600WDimensions: 19\" W x 3-1/2\" H x 15-4/5\" D Weight: 35 lb.