JBL EON210P COMPLETE PORTABLE PA SYSTEM

The EON210P consists of two 10-inch, two-way, powered loudspeakers, one with a detachable powered mixer and the other with a detachable storage compartment, one pair of unshielded speaker cables and a power cord. Capable of reproducing full bandwidth sound at high levels the 210P is comprised of a 250 mm (10 in) woofer, a 37.5 mm (1.5 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide driven by a 300 watt Crown® Class-D power amplifier and integrated mixer.

System Power Rating : 300 Watts (2 X 150 Stereo)

Maximum SPL Output : 124 dB peak system output (pink noise)

Net Weight of System : 33 lbs. (19 lbs. for unit with powered mixer, 14 lbs. for unit with storage pod)

System Type : Powered mixer with 2 two-way bass-reflex enclosures

Frequency Range (-10 dB) : 60 Hz - 20 kHz

Frequency Response (±3 dB) : 75 Hz - 19 kHz

AC input : 120 - 240 V 50/60 Hz, voltage selector switch sets operational range

Amplifier Design : Crown® Class D

Output Connector : 2 X 1/4” TS (unbalanced) amplifier outputs

Input Connectors : 8 inputs (4 Mono Mic/Line, 2 X Stereo)

Channels : 1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input, 1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack

Input Impedance : Ch 1-4 Combo: XLR 3 K Ohms Balanced
Ch 1-4 Combo: TRS 20 K Ohms Balanced
Ch 5-6: TRS 25 K Ohms Balanced
Ch 5-6: RCA 12 K Ohms Unbalanced
Ch 7-8: 3.5 mm 30 K Ohms Unbalanced