Peavey IPR 1600 Power Amplifier Peavey astounds with the IPR 1600 power amplifier, a part of the exciting IPR Series. Somehow, Peavey managed to make the IPR Series super-powerful in terms of wattage, but also incredibly lightweight — in fact, the lightest IPR Series weighs less than 7 lbs.! The 1,600-watt IPR 1600 features two channels with independent, 100Hz crossovers. Plus, there's a variable-speed fan housed in its lightweight aluminum chassis. In addition to thermal efficiency and reliability, there's also Peavey's DDT speaker protection circuitry built into the Peavey IPR 1600.

Model IPR 1600 Part Number 03001260 Product Type Power Amplifier Rated Power (2 x 2 ohms) 800 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven Rated Power (2 x 4 ohms) 530 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven Rated Power (2 x 8 ohms) 300 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven Rated Power (1 x 2 ohms) 1000 watts @ 1 kHz at <0.1% T.H.D Rated Power (1 x 4 ohms) 600 watts @ 1 kHz at <0.1% T.H.D Rated Power (1 x 8 ohms) 320 watts @ 1 kHz at <0.1% T.H.D. Minimum Load Impedance 2 ohms Maximum RMS Voltage Swing 55 volts Frequency Response 10 Hz - 50 kHz; +0, -3 dB at 1 watt T.H.D. (2 x 2 ohms) <0.1% @ 600 watts per channel from 20 Hz to 1.5 kHz, decreasing to 500 watts at 20 kHz at <0.25% T.H.D. (2 x 4 ohms) <0.1% @ 470 watts per channel from 20 Hz to 20 kHz T.H.D. (2 x 8 ohms) <0.1% @ 250 watts per channel from 20 Hz to 20 kHz Input CMRR > - 60 dB @ 1 kHz Voltage Gain x 60 (+35 dB) Crossover 100 Hz switchable 2nd order High pass and 3rd order Low Pass per channel Crosstalk > -70 dB @ 1 kHz at 100 watts power @ 4 ohms Hum and Noise > -105 dB, "A" weighted referenced to rated power @ 4 ohms Damping Factor (8 ohms) > 170:1 @ 20 Hz - 1 kHz at 8 ohms Phase Response +9 to - 86 degrees from 20 Hz to 20kHz Slew Rate > 12V/us Input Sensitivity .775 volts +/- 3% for 1 kHz 4 ohm rated power, .68 volts +/- 3% for 1 kHz. 2 ohm rated power Input Impedance 15k ohms, balanced and 7.5k ohms unbalanced Current Draw @ 1/8 power 550 watts @ 2 ohms, 390 watts @ 4 ohms, 250 watts @ 8 ohms Current Draw @ 1/3 power 1,160 watts @ 2 ohms, 810 watts @ 4 ohms, 460 watts @ 8 ohms Cooling Temperature dependent variable speed 80 mm DC fan Controls 2 front panel attenuators, crossover select switch for H.P.F, Normal and L.P.F. Indicator LEDs 2 DDT (clip limiting), 2 Signal presence, 2 Active status, 2 Temp and 2 DC protect Protection Thermal, DC, subsonic, incorrect loads, under and over voltage Connectors Inputs: Dual Combi 1/4” XLR, Outputs: Dual 1/4” signal patch, dual Speakon connectors Construction 0.062" thick aluminum Dimensions 3.5”x19” x 10.5” behind front panel + 0.6” for handle Dimensions 3.5"x19" x 10.5" behind front panel + 0.6" for handle Dimensions Packed 4.72" x20.8" x 12.44" (120mm x 530mm x 316mm) Net Weight 3.23 kg (7.125 lbs) Gross Weight 4.31 kg (9.5 lbs)