QSC GX3 Stereo Power AmplifierThe GX3 Stereo
Power Amplifier from QSC is ideal for professional entertainers who
require maximum performance and portability on a limited budget. QSC
designers have optimized output and appearance of the GX3, while
reducing raw material cost and weight. The rackmount GX3 power amp is
ideal for speakers in the 300 watt (Program) range and supplies maximum
possible power to 4 ohm and 8 ohm loads. The GX3 uses the
latest evolution of the QSC Grounded Collector output system, for
optimum cooling of the critical power transistors. A true Class B
biasing system combines maximum thermal efficiency with excellent audio
performance.
Power Rating:
8 / both channels driven / 1 kHz: 300 W
8 / single channel driven / 1 kHz: 350 W
4 / both channels driven / 1 kHz; 425 W
4 / single channel driven / 1 kHz; 500 W
2 / both channels driven / 1 kHz; 200 W
Distortion (typical): 20 Hz - 20 kHz: 1 dB below rated power 8 : less than 0.05% / 4 : less than 0.1%
Signal to Noise: (20 Hz - 20 kHz) 100 dB
Input Sensitivity: 1.2 Vrms
Voltage Gain: (8 ) 32.2 dB
Output Circuitry: Class B
Power Requirements: (1/8 power, pink noise at 4 , 120 V) 6.3A
Frequency Response: 20 Hz - 20 kHz, +0, 1 dB
Dynamic Headroom (4 ): 2 dB
Damping Factor: 100
Input Impedance ( ): Greater than 20k (balanced)
Maximum Input Level: +24 dB (16 Vrms)
Input Connectors (each channel): 3-pin XLR and 1/4" TRS, balanced, parallel Phono, unbalanced
Output Connectors (each channel) Speakon®, 1/4", Binding Posts
Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection
Load protected against DC faults
Front Panel Controls and Indicators: Gain controls, 21 detents
Red Clip LEDs, proportional, 0.1% THD threshold
Green Signal LEDs, threshold -35 dB
Blue Power LED, AC on
Rear Panel Controls: Full Range / Crossover switch
100 Hz, 3rd order LP (sub), 2nd order HP (top)
Dimensions (HWD): 3.5" (2RU) x 19" x 10.1" (89 mm x 483 mm x 257 mm)
Weight: Shipping / Net 30 (13.5 kg) / 25 lbs (11.5 kg) Agency Approvals: UL, CE, RoHS/WEEE compliant
|
Connect with us