Audio-Technica AT4040SP Studio Microphone Pack
The Audio-Technica AT4040SP Studio Pack offers you 2 of A-T's renowned 40 Series studio condenser microphones: the AT4040 large-diaphragm side-address condenser mic and the AT4041 cardioid condenser.

Each microphone is transformerless, resulting in exceptional transient response, and extremely clean output signals; each is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. Audio-Technica includes a shock mount, stand clamp and windscreen along with a protective wooden carrying case with this mic pack. Requires phantom power.

ELEMENT: Externally-polarized (DC bias) condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20,000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY: -32 dB (25.1 mV) re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal) NOISE: 12 dB SPL DYNAMIC RANGE (typical): 133 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 82 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 4.2 mA typical SWITCHES: Flat, roll-off; 10 dB pad (nominal) WEIGHT: 12.7 oz (360 g) DIMENSIONS: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter OUTPUT CONNECTOR: Integral 3-pin XLRM-type ACCESSORIES FURNISHED: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case AUDIO-TECHNICA CASE STYLE: R1 The AT4041 Specs: ELEMENT: Fixed-charge back plate, permanently polarized condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20,000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY: -36 dB (15.8 mV), re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical): 121 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 3.2 mA typical SWITCH: Flat, roll-off WEIGHT: 4.2 oz (120 g) DIMENSIONS: 6.28" (159.5 mm) long, 0.83" (21.0 mm) body diameter OUTPUT CONNECTOR: Integral 3-pin XLRM-type ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case AUDIO-TECHNICA CASE STYLE: S1